三公要怎么压才能赢钱

Search

Featured Product

New Product Sign-up

三公要怎么压才能赢钱sign up for our new product introductions:

Glossary of Switch Terms

Actuator: The mechanical interface between the basic switch contacts and the means of operation, such as the operator’s finger.

Actuation Force: The required force to change a circuit’s electrical state.

Alternate Action Switch: A Pushbutton style switch where the change of the electrical state is maintained between actuations.

Ampere: A unit of electrical current flow.

Base (Housing): A base of a switch is the main member to which the conducting parts or insulator unit are attached. It may also have parts of the operating or control mechanism attached.

Bounce: Rebounding of moving contact against fixed contact during transfer.

Break: Interruption of a circuit. Double-break occurs when a single mechanism interrupts two contacts simultaneously.

Break Before Make: The term given to a double throw switch where the first circuit is opened before the second circuit is closed.

Capacity: Usually refers to the current handling capability of a switch.

Chatter: Rapid opening and closing of contacts, usually exhibited during extreme vibration and/or shock.

Clearance (Spacing): Distance through air between electrically live parts of opposite polarity or to ground.

Contact: The contact is a conducting part designed to be united by pressure to another conducting part for the purpose of carrying current.

Contact Bounce: Oscillation of the movable contact upon closure of the circuit.

Contact Gap: The minimum distance between the fixed and moveable contacts.

Contact Resistance: The resistance of current flow across closed contacts.

Dead-Break: Open circuit condition, usually caused when slowly actuating snap-action switches. Results from low contact pressure or contact lift-off.

Detent: Feature that indicates actuation point has been reached. Can also be referred to as tactile feel.

Dielectric Strength: The ability of an insulating material to resist voltage from arcing across its surface.

Differential: Distance between trip point (or force) and reset point (or force).

Double-Break: A mechanism that breaks the circuit at two points simultaneously by means of a “shorting bar” like device.

Double-Throw: Contact arrangement that alternately transfers normally open and normally closed circuits.

Dust-Tight: Sealed switch will withstand sand and dust contamination.

Electrical Life: Expected cycle life when switch is operated at full rated load.

Free Position: Point at which plunger exists in the un-operated condition.

Insulation Resistance: The resistance to current flow of the insulating materials between contacts.

Lever Actuator: A device, hinged or spring type, applied to a basic switch to facilitate its application.

Make Before Break: The term given to a double throw switch when the second circuit is closed before the first circuit is opened.

Momentary Action Switch: The term given to a switch where a circuit is continuously closed or opened only when force is applied. The electrical state returns to its normal position when the force is removed.

Normally Closed: The term given to a switch where a circuit is closed in the normal switch position.

Normally Open: The term given to a switch where a circuit is open in the normal switch position.

Operating Point: Point at which contacts transfer. Usually measured from the switch mounting holes.

Over Travel: The distance an actuator travels after the circuit is closed.

Pole: The term to denote a completely separate circuit, which passes through a switch at one time.

Pre Travel: The movement of the actuator prior to closing the circuit. Sometimes identical to “Travel to Make”.

Reset Point: Point at which contact resumes normal position. Single-Break: Mechanism that transfers one contact.

Single Throw Switch: A single throw switch is a switch by means of which the circuit can be opened or closed by moving the switch blade into or out of one set of contacts only.

Snap Action: The abrupt transfer of contacts from one position to another. This action is relatively
independent of the speed of actuator travel.

Splash Proof: Sealed switch will withstand heavy rain or stream of water.

Switch: A switch is a device for making, breaking, or changing the connections in an electric circuit.


Switch Abbreviations:

N.C.: Normally Closed circuit

N.O.: Normally Open circuit

SPST: Single Pole Single Throw

SPDT: Single Pole Double Throw

DPST: Double Pole Single Throw

DPDT: Double Pole Double Throw

MBB: Make Before Break

BBM: Break Before Make

Throw: The term denotes the number of positions in which a given pole is closed.

Travel to Make: The distance parallel to the designated direction of the actuator movement at which point a circuit is closed.

Watertight: Sealed switch will withstand submersion to various depths depending on specification level.

Wiping Action: Lateral travel of movable contact over fixed contact while pressure between the two contacts exists. Occurs during plunger travel. This action helps clean the contacts of contamination.

七乐彩选号最准公式 七乐彩近50期走势图 七乐彩近5oo期走势图 七彩大公鸡下载苹果版 七乐彩近期100 七乐彩预测最准十专家预测 七乐彩选号秘籍 七乐彩随机选 七乐彩预则最准专家今晚上 七乐彩选号简单方法